OHaus Ranger 3000 & Valor 7000 Set Up Instructions

Instructions for setting up the OHaus Ranger 3000 & Valor 7000 scale

Instructions for setting up these scales can be found in this video.

If you prefer written instructions please follow the steps below.

First set of Menu steps

  1. Long press Menu button - screen should show CAL
  2. Press Print 5 times to get to Print on the menu options
  3. Press On/Zero, the screen should show reset
  4. Press Print twice to get to A Print on the scale
  5. Press On/Zero
  6. You should see inter on the scale
  7. Press On/Zero
  8. You should see a 1
  9. Press On/Zero
  10. You should see Contnt on the scale
  11. Press Menu and the weight (0s) should show up again

Next set of Menu steps

  1. Long press Menu button - screen should show CAL
  2. Press Print 6 times until you see COM
  3. Press On/Zero, the screen should now show reset
  4. Press Print and the scale should show Baud
  5. Press On/Zero and should see 9600
  6. Press On/Zero and should see Parity
  7. Press On/Zero and should see 8 None
  8. Press On/Zero and should see Stop
  9. Press On/Zero and should see 1
  10. Press On/Zero and should see Handsh
  11. Press On/Zero and should see None
  12. Press On/Zero and should see alt.cm
  13. Press On/Zero and should see print
  14. Short Press Menu and should see the scale weight again

Final step

Turn your scale off and on again and plug in your bluetooth adapter.


How did we do?


Powered by HelpDocs (opens in a new tab)