Watch how to set up these scales in our video on connecting RFID wands and scales to the Canix mobile app (Scale setup runs from :40-4:02).
If you prefer written instructions, follow the steps below.
First set of Menu steps
-
Long press Menu button - screen should show CAL. If it doesn't slide your legal for trade switch under the scale to off.
-
Press Print 5 times to get to PRINT on the menu options
-
Press On/Zero, the screen should show reset
-
Press Print twice to get to A PRINT on the scale
-
Press On/Zero
-
You should see CONT on the scale
-
Press On/Zero
-
You should see a 1
-
Press On/Zero
-
You should see CONTNT on the scale
-
Press Menu and the weight (0s) should show up again
Next set of Menu steps
-
Long press Menu button - screen should show CAL.
-
Press Print 6 times until you see COM
-
Press On/Zero, the screen should now show RESET
-
Press Print and the scale should show BAUD
-
Press On/Zero and should see 9600
-
Press On/Zero and should see PARITY
-
Press On/Zero and should see 8 None
-
Press On/Zero and should see STOP
-
Press On/Zero and should see 1
-
Press On/Zero and should see HANDSH
-
Press On/Zero and should see None
-
Press On/Zero and should see alt.com
-
Press On/Zero and should see PRINT
-
Short Press Menu and should see the scale weight again
Final step
Turn your scale off and on again to ensure the settings are saved.